Beatbot AquaSense 2 Pro: The Industry-Leading 5-in-1 AI Robotic Pool Cleaner

Keeping a swimming pool clean involves more than removing leaves from the water. Dirt accumulates on the floor, algae and residue cling to the walls, oils build up along the waterline, and fine suspended particles can leave the water looking cloudy.

The Beatbot AquaSense 2 Pro brings these cleaning tasks together in one advanced robotic pool cleaner. Its 5-in-1 cleaning system covers the water surface, waterline, walls and floor, while ClearWater™ technology helps clarify the water by binding fine particles for more efficient filtration.

Powered by CleverNav™ intelligent navigation and a 22-sensor system, the AquaSense 2 Pro is designed to deliver thorough pool coverage with less manual intervention. From climbing curved walls to collecting floating debris and returning to the surface for easy retrieval, it combines powerful cleaning performance with practical features that make regular pool maintenance simpler.

5-in-1 Cleaning: One Robot for Complete Pool Care

Most robotic pool cleaners concentrate on underwater cleaning, leaving pool owners to deal with floating debris and water clarity separately. The AquaSense 2 Pro takes a more comprehensive approach by integrating five specialised cleaning functions into one device.

• Water Surface Cleaning: Collects floating leaves, insects and other debris before they sink.

• Waterline Cleaning: Scrubs away oils, dirt and residue that accumulate around the waterline.

• Wall Cleaning: Climbs pool walls to remove attached dirt and surface debris.

• Floor Cleaning: Collects leaves, grit and other debris from the pool floor.

• Water Clarification: Uses ClearWater™ natural clarification technology to help remove fine suspended particles.

Combining these functions means less reliance on separate cleaning equipment. Rather than having to skim the surface, brush the waterline and run an underwater cleaner independently, pool owners can manage several aspects of pool maintenance with a single robot.

ClearWater™ Automatic Clarification: Crystal-Clear Water with Natural Technology

A pool can look clean on the surface while still appearing cloudy. This is often caused by fine suspended particles that are too small to settle quickly or be captured efficiently by conventional filtration alone.

The AquaSense 2 Pro addresses this problem with ClearWater™ Automatic Clarification Technology.

The system automatically distributes natural clarifying agents made from recycled crab shells. These agents bind to fine suspended particles, including dirt, oils and organic residue, allowing them to form larger particles that are easier for the filtration system to capture.

Unlike conventional approaches that rely on chemical clarifiers, ClearWater™ uses a natural, skin-safe clarification agent designed with environmental considerations in mind.

Beatbot's stated performance is up to four times faster clarification compared with traditional methods.

This technology adds another dimension to robotic pool cleaning. Instead of focusing exclusively on visible debris, the AquaSense 2 Pro also helps address the fine particles that affect water clarity.

It is worth remembering that water clarification works alongside normal pool filtration, sanitisation and water balancing rather than replacing them.

CleverNav™ AI Navigation: Intelligent Cleaning Across the Entire Pool

A powerful cleaning system is only effective when the robot can reach the areas that need attention. Pool layouts vary considerably, with steps, corners, curved walls, shelves and different floor depths creating challenges for conventional cleaning patterns.

The AquaSense 2 Pro uses CleverNav™ intelligent navigation, supported by 22 sensors, to optimise its cleaning routes and adapt to different pool environments.

Rather than depending entirely on a fixed movement pattern, its navigation system uses sensor information to guide the robot through the pool and improve cleaning coverage.

The system also incorporates SonicSense technology for obstacle avoidance and self-recovery, helping the robot navigate around potential obstructions and continue its cleaning cycle.

This is particularly useful in pools with more complicated layouts. A cleaner that repeatedly follows the same route may spend too much time covering familiar areas while missing corners or sections around steps. Intelligent route optimisation helps distribute cleaning more effectively across the available space.

Combined with its 5-in-1 cleaning capabilities, CleverNav™ helps the AquaSense 2 Pro maintain coverage across both the water surface and underwater areas.

Wall Climbing Mastery and Dual-Pass Waterline Scrubbing

The waterline is one of the more challenging areas of a swimming pool to maintain. Sunscreen, body oils, airborne dust and other residue can gradually accumulate around the edge, creating a visible ring that ordinary floor cleaning cannot remove.

The AquaSense 2 Pro is designed to tackle this area with advanced traction, a powerful pump motor and a dedicated dual-pass waterline scrubbing approach.

Its climbing system allows it to move across different pool surfaces, including concrete, ceramic tiles, vinyl and fibreglass. This helps maintain cleaning performance across straight and curved walls rather than limiting coverage to easily accessible sections.

When cleaning the waterline, the robot follows an efficient N-shaped route and scrubs the area twice per pass. The additional scrubbing action helps address residue that may remain after a single cleaning pass.

This is an important distinction because waterline maintenance is not simply about collecting loose debris. It requires consistent physical contact with the pool surface to loosen the dirt and oils that gradually build up over time.

By combining wall climbing with repeated waterline scrubbing, the AquaSense 2 Pro provides more comprehensive cleaning of areas that are often overlooked by basic robotic pool cleaners.

Nine-Motor System: Powerful Cleaning with Precise Control

Effective pool cleaning requires more than strong suction. The robot needs enough power to move across different surfaces, climb walls, maintain stability and collect debris without compromising its navigation.

The AquaSense 2 Pro features a nine-motor system designed to support powerful suction, manoeuvrability and stable operation.

Its architecture incorporates a floating chamber and surface propeller components, supporting the different demands of surface and underwater cleaning.

Dual Group Roller Brush System

The AquaSense 2 Pro also features a dual group roller brush system with four brushes.

Rather than relying on suction alone, the brushes make direct contact with the pool surface to loosen dirt and debris. This mechanical scrubbing action is particularly important when dealing with particles that have settled onto the floor or become attached to walls.

The combination of four brushes and powerful suction helps the robot collect both larger debris and finer dirt during its cleaning cycles.

For pool owners, this means the cleaning system addresses two different stages of the process: loosening debris from the surface and drawing it into the filtration system.

Dual Layer Ultra Fine Filtration: Capturing Debris from Leaves to Fine Dust

A robotic pool cleaner needs an effective filtration system to prevent collected debris from returning to the water.

The AquaSense 2 Pro uses a dual layer filtration system with two different filter densities:

• 150 μm inner filter: Captures finer particles that pass through the outer filtration layer.

• 250 μm outer filter: Handles larger debris and helps prevent the filter from becoming overloaded too quickly.

• 3.7 L filter capacity: Provides room for a substantial amount of collected debris.

This setup allows the robot to handle a broad range of pool contaminants, including leaves, branches, grass, dust and gravel.

The combination of different filtration densities is useful because pool debris is rarely uniform. Large leaves and twigs require sufficient filter capacity, while smaller particles need finer filtration to help keep the water looking clean.

A larger 3.7 L filter capacity also means there is more room to collect debris during a cleaning cycle before the filter needs to be emptied.

Designed for Complex Pool Shapes and Better Edge Navigation

Not every swimming pool has a simple rectangular layout. Oval, kidney-shaped and freeform pools introduce different turning angles, curved walls and corners that can make consistent cleaning more difficult.

The AquaSense 2 Pro is designed to accommodate a wide range of pool shapes and surfaces.

Its navigation and manoeuvring system incorporates four precision guide wheels and 360° navigation, helping it make controlled turns and approach edges and corners more effectively.

This is particularly valuable around areas where the pool floor meets the wall, as well as corners and other sections where debris can accumulate.

For pools with more complicated layouts, improved manoeuvrability helps the robot maintain its cleaning route without relying solely on straight-line movement.

App Remote Navigation: Take Control of Surface Cleaning

Automatic cleaning handles most of the work, but there are times when a particular area needs extra attention.

The Beatbot app adds another level of control to the AquaSense 2 Pro, allowing users to interact with the robot during surface cleaning.

Through the app, users can:

• Navigate the robot in different directions.

• Adjust its movement speed to reach target areas more quickly.

• Activate one-touch parking.

• Select and customise available cleaning modes.

• View cleaning information and operating status.

• Access software updates when available.

The remote navigation feature is particularly useful when floating debris gathers in one corner of the pool or near the steps. Instead of waiting for the robot to reach that area through its automatic route, users can direct it towards the debris.

Please note: Remote directional navigation and speed control are available for surface cleaning, not underwater cleaning.

This distinction allows the AquaSense 2 Pro to combine automatic underwater cleaning with more direct user control when collecting floating debris.

One-Click Surface Parking: Easier Retrieval Without Heavy Lifting

Retrieving a robotic pool cleaner can be inconvenient, particularly when the unit is submerged and filled with water.

The AquaSense 2 Pro simplifies this process with its dedicated surface parking system.

After completing a cleaning cycle or when its battery runs low, the robot automatically returns to the water surface and sends an app notification. Users can also activate one-click poolside parking when they want to retrieve it.

Its SmartDrain™ automatic water release system helps discharge water from the robot, making it lighter and easier to lift out of the pool.

These features address a practical part of pool maintenance that is often overlooked: getting the cleaner out of the water after the cleaning is finished.

Rather than having to fish the robot out manually or lift a water-filled unit, users can bring it to the surface and retrieve it with less effort.

Built for Long-Term Use: Automotive-Grade IMR Coating and 3 Year Warranty

A robotic pool cleaner operates in a demanding environment. Regular exposure to pool water, sunlight and cleaning chemicals places ongoing demands on its exterior materials and construction.

The AquaSense 2 Pro features a durable automotive-grade IMR coating, designed to provide a robust exterior finish.

It is also backed by a 3 year warranty with full machine replacement, providing additional peace of mind over the product's service life.

Together, these features reflect an approach that considers not only cleaning performance but also durability and long-term ownership.

Why Choose the Beatbot AquaSense 2 Pro?

The AquaSense 2 Pro brings together several functions that are traditionally handled by different pieces of pool cleaning equipment.

Its main advantage is the integration of surface cleaning, underwater scrubbing and automatic water clarification into one robotic system.

For pool owners, the benefits are particularly relevant when:

• Floating debris regularly collects on the water surface.

• Dirt and oils accumulate around the waterline.

• Pool walls and floors need regular brushing and debris removal.

• Fine suspended particles affect water clarity.

• The pool has curved walls, corners or a more complicated layout.

• Easier robot retrieval is a priority.

With CleverNav™ intelligent navigation, 22 sensors, a nine-motor system and ClearWater™ natural clarification technology, the Beatbot AquaSense 2 Pro offers a comprehensive approach to automated pool care.

It is more than an underwater robotic pool cleaner. It is a 5-in-1 cleaning system designed to manage multiple aspects of pool maintenance, helping keep the water surface, walls, floor and waterline cleaner while supporting clearer water.

Frequently Asked Questions 

Can the Beatbot AquaSense 2 Pro clean pool steps and shallow ledges?

The AquaSense 2 Pro can clean shallow areas and Baja shelves with a water depth of at least 40 cm, provided the area is wider than the robot. However, it is not designed to climb standard pool steps. Its CleverNav™ navigation and four precision guide wheels help it navigate corners and edges, although some tight or awkward areas may still need occasional manual brushing.

Can the AquaSense 2 Pro remove fine dust and cloudy water?

Yes. The AquaSense 2 Pro combines dual-layer filtration with ClearWater™ Automatic Clarification Technology. Its 150 μm and 250 μm filters capture debris of different sizes, while the natural clarifying agents bind smaller suspended particles together, making them easier for the filtration system to collect. However, cloudy water caused by unbalanced pH, insufficient sanitiser or ongoing algae growth still requires appropriate pool water treatment.

Does the AquaSense 2 Pro remove algae and waterline stains?

The AquaSense 2 Pro can collect loose algae and scrub dirt and residue from pool walls and the waterline. Its dual-pass waterline scrubbing helps tackle the oils, sunscreen and organic deposits that accumulate around the water's edge. However, stubborn or slippery algae should be treated with an appropriate algaecide before robotic cleaning, while heavy surface build-up may still require manual brushing.

Can I control the AquaSense 2 Pro remotely while it is underwater?

No. The Beatbot app's remote navigation feature is designed for water surface cleaning, as Wi-Fi signals cannot reliably reach the robot underwater. When it is operating on the surface, you can control its direction and speed, guide it towards specific areas and activate one-touch parking to bring it back to the pool edge.

How often should I clean the AquaSense 2 Pro's filter basket?

It's best to rinse both filter baskets after every cleaning cycle. Remove collected leaves, sand, hair and other debris, and check the brushes, propellers and water outlets for anything caught in them. If your pool contains a large amount of leaves, dirt or algae, inspect the baskets during cleaning as well. Keeping the filtration system clear helps maintain suction performance and consistent cleaning efficiency.