Choosing between the Beatbot Sora 70 and AquaSense 2 Pro depends on your pool size and the type of cleaning it needs.

Both models clean the pool floor, walls, waterline and water surface. However, they work differently. The Sora 70 uses JetPulse™ to collect floating debris, while the AquaSense 2 Pro offers longer surface-cleaning runtime, more intensive waterline scrubbing and ClearWater™ technology to help remove fine particles from the water.

The Sora 70 is a good fit for many residential pools up to 300 m², especially those that collect leaves and pollen. The AquaSense 2 Pro is better suited to larger pools up to 360 m², pools with stubborn waterline marks, or pools that need extra help with water clarity.

This guide compares their cleaning performance, coverage, runtime and key features to help you choose the right model.

Sora 70 vs AquaSense 2 Pro: What Are the Main Differences?

The biggest differences come down to five things: pool size, suction flow rate, waterline cleaning, surface cleaning and water clarification.

Runtime and coverage figures are based on Beatbot's published specifications. Actual performance depends on pool layout, debris levels and cleaning mode.

Which Model Cleans Your Pool Better?

Floor and Wall Cleaning

Both models clean pool floors and walls, but their specifications differ.

The Sora 70 has a higher advertised water flow rate of 6,800 GPH, compared with 5,500 GPH for the AquaSense 2 Pro. It uses a central pump system designed to collect debris such as leaves, sand and dirt.

The AquaSense 2 Pro uses a nine-motor system and CleverNav™ navigation. Its 22 sensors help the robot plan its route and move around the pool.

For a straightforward pool, both models offer broad cleaning coverage. For a larger or more complex pool, the AquaSense 2 Pro's navigation features may be useful.

However, a higher flow rate does not automatically mean better results in every pool. The type of debris, pool shape and cleaning mode also matter.

Waterline Cleaning

If a dark ring forms around your pool at the waterline, this is an important difference to consider.

The AquaSense 2 Pro uses an N-shaped cleaning pattern and scrubs the waterline twice during each wall-climbing pass. This gives it more repeated cleaning along the waterline.

The Sora 70 scrubs the waterline once per pass. This may be enough for pools where marks build up slowly and are easy to remove.

Waterline marks often come from sunscreen, body oils and other residues. If the ring returns quickly after cleaning, the AquaSense 2 Pro's dual-pass system is worth considering.

If your waterline stays relatively clean between regular cleaning sessions, the Sora 70 may be all you need.

Water Surface Cleaning

Both models can collect floating debris, but they use different systems.

The Sora 70 uses JetPulse™, a twin-jet system that guides floating debris towards the suction inlet. This helps it collect leaves, pollen and insects from the water surface.

It can run in surface-cleaning mode for up to seven hours. You can also control its direction across the surface using the Beatbot app.

The AquaSense 2 Pro offers up to 11 hours of surface cleaning on a single charge. It does not use the Sora 70's JetPulse twin-jet system, but its longer runtime allows it to keep working on the surface for longer.

Which is better depends on your pool.

• Choose the Sora 70 if leaves, pollen and insects regularly fall into your pool and you want active guidance of floating debris towards the suction inlet.

• Choose the AquaSense 2 Pro if your pool is larger and longer surface-cleaning sessions are more important to you.

Neither runtime figure guarantees that every pool will be fully cleaned in one session. Wind, debris levels and pool layout all affect the result.

Water Clarification

The AquaSense 2 Pro has one feature that the Sora 70 does not: ClearWater™ natural clarification.

ClearWater uses a clarifying agent made from recycled crab shells. It helps bind small particles together so the filtration system can capture them more easily.

This can be useful if your pool water often looks cloudy because of fine particles, even when you maintain the pool properly.

The Sora 70 does not include this feature. It focuses on physical debris collection and cleaning the pool's surfaces.

ClearWater is not a replacement for balanced water chemistry, proper circulation or regular filtration. If your pool water is cloudy, you should still check its chemical balance and filtration system.

If your water is already clear and easy to maintain, you may not need the extra clarification feature.

Which Model Is Better for a Larger Pool?

The AquaSense 2 Pro is designed for a larger maximum pool area.

The Sora 70 is rated for pools up to approximately 300 m², while the AquaSense 2 Pro is rated for up to 360 m². That gives the AquaSense 2 Pro about 20% more rated coverage area.

The larger battery also supports longer cleaning sessions in some modes.

For most pools within the Sora 70's rated coverage, the difference in maximum pool area may not matter. The Sora 70 can still be a strong option if floating debris is your main concern.

The AquaSense 2 Pro is worth considering if your pool is between 300 and 360 m², or if you want longer surface-cleaning sessions.

Keep in mind that maximum coverage is a guide, not a guarantee. An irregular pool with many obstacles may need more cleaning time than a simple rectangular pool of the same area.

What About Navigation and Pool Shape?

Pool shape can affect how well a robot moves around the floor, walls and corners.

The Sora 70 uses SonicSense™ ultrasonic sensing to help detect obstacles. Its cleaning modes cover the main pool areas, including the water surface and suitable shallow platforms.

The AquaSense 2 Pro uses CleverNav™ navigation and 22 sensors to plan its cleaning route. This can help it cover larger or more complex pools.

If your pool has curved walls, several corners or an unusual layout, the AquaSense 2 Pro may be worth considering for its navigation features.

However, neither model should be treated as the ideal choice for every multi-level pool. If your pool has raised platforms, complex steps or several different elevations, compare the design with the Beatbot Australia robotic pool cleaner range to see whether another model is better suited to your pool.

What If Your Pool Has Shallow Platforms?

The Sora 70 is designed to clean suitable shallow platforms in water from about 20 cm deep. This can be useful for pools with broad lounging ledges or beach-entry areas.

The AquaSense 2 Pro can clean suitable steps, but Beatbot states that the water depth should be greater than 40 cm and the steps must be wide enough for the robot to operate.

If your pool has very shallow areas, check the water depth and platform size before choosing a model. Do not assume that both robots will clean the same shallow areas.

Which Model Should You Choose for Your Pool?

The easiest way to decide is to match the cleaner to your main pool-maintenance problem.

Choose the Sora 70 If…

• Your pool is up to about 300 m².

• Leaves, pollen and insects often float on the water.

• You want JetPulse™ to guide floating debris towards the suction inlet.

• Your pool has suitable shallow platforms that need cleaning.

• Your waterline marks are manageable with regular cleaning.

• Your pool water is usually clear and does not need extra clarification.

The Beatbot Sora 70 is a good choice if surface debris is one of your biggest problems and you want broad cleaning coverage in one cordless robot.

Choose the AquaSense 2 Pro If…

• Your pool is between about 300 and 360 m².

• Your waterline ring returns quickly after cleaning.

• You want two-pass waterline scrubbing.

• Your pool needs longer surface-cleaning sessions.

• Fine particles often make your water look cloudy.

• You want navigation features designed for larger or more complex pool layouts.

The Beatbot AquaSense 2 Pro is worth considering if you need more coverage, more intensive waterline cleaning or the added water-clarification function.

Are Either of These Models Right for Every Pool?

Not necessarily. Your pool's size and cleaning needs should guide your choice.

If your pool is smaller and mainly needs routine underwater cleaning, you may not need all the features offered by these two models.

The Beatbot Sora 30 is another option for floor, wall, waterline and suitable shallow-platform cleaning.

If you mainly want a lighter robot for regular underwater cleaning, consider the Beatbot Sora 10.

For pools with several raised platforms or a layout that needs more advanced mapping, compare the other models in the Beatbot Australia pool cleaner range.

Warranty and Pool Compatibility

Both the Sora 70 and AquaSense 2 Pro come with a three-year warranty. The AquaSense 2 Pro includes full replacement protection under its stated warranty terms.

Both models support common pool surfaces, including concrete, ceramic tile, vinyl and fibreglass. They are also designed for saltwater pools within the manufacturer's specified salt concentration limits.

Before buying, check the product manual for your pool type and water conditions. You can also review the Beatbot Australia warranty policy for the current terms.

FAQs

Is the Sora 70 better than the AquaSense 2 Pro?

Neither model is better for every pool. The Sora 70 is a strong choice for pools that regularly collect floating debris. The AquaSense 2 Pro is better suited to larger pools or pools that need more intensive waterline cleaning and extra help with water clarity.

Does the Sora 70 have ClearWater™ clarification?

No. ClearWater™ is a feature of the AquaSense 2 Pro. The Sora 70 focuses on surface and underwater cleaning.

Which model is better for floating leaves?

The Sora 70 uses JetPulse™ to guide floating debris towards its suction inlet. It is worth considering if your pool regularly collects leaves, pollen or insects.

The AquaSense 2 Pro also cleans the water surface, but it offers longer surface-cleaning runtime rather than the Sora 70's JetPulse twin-jet system.

Which model is better for waterline rings?

The AquaSense 2 Pro scrubs the waterline twice during each wall-climbing pass. This makes it a good option for pools where waterline marks build up quickly.

The Sora 70 uses single-pass waterline scrubbing, which may be enough for pools with lighter buildup.

Can both models clean large pools?

Both can clean large residential pools, but their rated maximum areas differ. The Sora 70 is rated for up to 300 m², while the AquaSense 2 Pro is rated for up to 360 m².

Actual coverage depends on pool shape, obstacles and debris levels.

Does ClearWater™ replace pool chemicals?

No. ClearWater™ helps fine particles clump together so they can be captured by the filter. You still need to maintain balanced pool water, proper circulation and regular filtration.

Do both models work in fibreglass and saltwater pools?

Both support fibreglass pools and common pool surfaces. They are also designed for saltwater pools within the manufacturer's specified limits. Check the relevant product manual before use.