Beatbot Sora 70 vs Sora 30 vs Sora 10: Which Is Best for Your Pools?

Keeping a swimming pool clean can be harder when leaves, dirt and insects build up every day. The right robotic pool cleaner can help reduce the time you spend cleaning your pool.

The Beatbot Sora range has three cordless pool cleaners: the Sora 10, Sora 30 and Sora 70. All three clean the pool floor, walls and waterline, but they differ in several important ways.

The Sora 70 can also collect floating debris from the water surface. The Sora 30 can clean suitable shallow pool ledges, while the Sora 10 is a lighter option for everyday pool cleaning.

This guide compares the three models to help you choose the right one for your pool.

Beatbot Sora 10 vs Sora 30 vs Sora 70: Key Differences

The best model depends on what you need to clean.

• Beatbot Sora 70: Best for pools that need both surface and underwater cleaning.

• Beatbot Sora 30: Best for underwater cleaning, especially if your pool has shallow ledges.

• Beatbot Sora 10: Best for everyday underwater cleaning in a lighter design.

Here is a quick comparison of their main features.

Do You Need a Pool Cleaner That Cleans the Water Surface?

Before choosing a model, think about the type of debris that usually ends up in your pool.

Leaves, pollen and insects often float on the water before sinking to the bottom. If your pool collects a lot of this debris, cleaning the surface can save you time.

The Beatbot Sora 70 is the only model in the Sora range that actively cleans the water surface. Its JetPulse™ system uses two water jets to draw floating debris towards the filter. It can run in surface-cleaning mode for up to seven hours, and you can guide it across the surface using the Beatbot app.

The Sora 30 and Sora 10 do not collect floating debris. They clean underwater areas and return to the surface or waterline to make removal easier.

These are two different functions. Returning to the surface for collection does not mean the robot cleans floating debris.

If your pool often collects leaves from nearby trees, the Sora 70 is worth considering. If most of your debris settles on the floor, the Sora 30 or Sora 10 may be enough.

Which Beatbot Sora Model Is Right for Your Pool?

Sora 70: For Pools That Need Surface and Underwater Cleaning

The Sora 70 cleans five areas: the water surface, floor, walls, waterline and suitable shallow platforms.

It is a good choice for pools that collect leaves, pollen and insects from trees or wind. Instead of using one tool for floating debris and another for underwater cleaning, you can use the Sora 70 for both.

Its 6 L debris basket holds more debris than the baskets in the other two models. This can be useful if your pool gets dirty quickly and you do not want to empty the basket as often.

The Sora 70 also supports remote surface control through the Beatbot app. You can guide the robot towards areas that need extra attention.

If you want to compare other Beatbot cleaners, explore the Beatbot Australia robotic pool cleaner range.

Choose the Sora 70 if: Your pool regularly collects floating debris and you want one robot to clean both the surface and underwater areas.

Sora 30: For Pools With Shallow Ledges

The Sora 30 cleans the floor, walls, waterline and suitable shallow platforms. It does not clean floating debris, but it covers the main underwater areas.

One of its main advantages is its ability to clean suitable platforms in water as shallow as about 20 cm. This makes it worth considering if your pool has a shallow lounging area or beach entry.

It also has a 10,000 mAh battery and a 5.2 L debris basket. Beatbot also lists a 3-micron ultra-fine filter as a separate accessory. Check the Australian store for current availability before ordering.

The Sora 30 is a good middle option if you want broad underwater coverage but do not need surface cleaning.

You can check the latest specifications on the Beatbot Sora 30 product page and compare them with the Beatbot Sora 10 product page.

Choose the Sora 30 if: Your pool has shallow ledges or you want a larger battery without paying for surface-cleaning features you may not use.

Sora 10: For Everyday Pool Cleaning

The Sora 10 is designed for pool owners who need the main cleaning functions without extra features.

It cleans the floor, walls, waterline and suitable platforms in water about 30 cm deep or more. Its 5 L debris basket is suitable for collecting everyday pool debris.

The Sora 10 has a 7,800 mAh battery and offers up to five hours of floor-only cleaning. It also charges in about 3.5 hours, which is around an hour faster than the Sora 30 and Sora 70.

At about 8.5 kg, it is the lightest model in the range. When the cleaning cycle ends, it parks at the waterline for 10 minutes, making it easier to lift out of the pool.

For the full feature list, see the Beatbot Sora 10 product page.

Choose the Sora 10 if: You mainly need underwater cleaning and prefer a lighter robot that is easy to handle.

What Are the Main Differences Between the Three Models?

1. Cleaning Coverage

All three models clean the pool floor, walls and waterline. They can also clean suitable shallow platforms.

The main difference is the water surface. Only the Sora 70 collects floating debris while cleaning.

The Sora 30 and Sora 10 are designed for underwater cleaning. They cannot replace a surface skimmer if leaves and insects are a regular problem.

The Sora 30 and Sora 70 can clean suitable shallow platforms in water about 20 cm deep. The Sora 10 requires about 30 cm of water.

If your pool has a shallow ledge, measure the water depth before choosing a model. Also check that the platform meets Beatbot's minimum size requirements.

2. Filter and Debris Basket

The Sora 70 has a 6 L debris basket, the Sora 30 has a 5.2 L basket, and the Sora 10 has a 5 L basket.

All three use a standard 150-micron filter. The Sora 30 and Sora 70 also support an optional 3-micron ultra-fine filter for smaller particles. Check the Australian store for current accessory availability.

A larger basket can hold more debris before it needs emptying. This may help if your pool collects a lot of leaves or other debris.

For a pool with less debris, a 5 L basket may be enough. The best choice depends on how often your pool gets dirty.

Remember that a robotic pool cleaner removes physical debris. You still need to maintain your pool's water chemistry and filtration system.

3. Battery and Runtime

Battery life affects how long the robot can clean before it needs charging.

The Sora 30 and Sora 70 both have a 10,000 mAh battery. The Sora 10 has a smaller 7,800 mAh battery.

For floor-only cleaning, all three models offer up to five hours of runtime. For combined floor, wall and waterline cleaning, the advertised maximum is up to 4.5 hours for the Sora 30 and Sora 70, and up to four hours for the Sora 10.

The Sora 70 can also run for up to seven hours in surface-cleaning mode. This is a separate mode, not the runtime for every cleaning function combined.

The Sora 10 charges in about 3.5 hours, while the other two models take about 4.5 hours.

Actual runtime depends on the cleaning mode and pool conditions.

4. App Control and Easy Retrieval

All three models support the Beatbot app and offline control. The app provides additional features, including cleaning settings and monitoring.

The Sora 70 has remote surface control, so you can guide it across the water. It also supports one-touch retrieval through the app.

The Sora 30 can return to the surface after cleaning, making it easier to collect. It also has a parking function to help bring it to the pool edge.

The Sora 10 parks at the waterline when the cleaning cycle ends and stays there for 10 minutes.

Think about how you will remove the robot from your pool. If you prefer not to reach down into the water, the retrieval features may be an important part of your decision.

5. Warranty

The Sora 70 comes with a three-year warranty, while the Sora 30 and Sora 10 come with two-year warranties.

Before buying, check the Beatbot Australia warranty policy for the latest coverage details.

You should also review the Australian return policy to understand the return conditions.

Will a Beatbot Sora Work in Your Pool?

The Sora range is designed for both above-ground and in-ground pools. The models support common pool shapes, including rectangular, round and freeform pools.

Compatible pool surfaces include fibreglass, concrete, vinyl and ceramic tile. The Sora models are also designed for saltwater pools within the manufacturer's specified salt concentration limits.

Before buying, check three things:

• Pool size: Compare your pool's area with the coverage rating for your chosen model.

• Pool depth: Make sure the robot can reach your shallow ledges and entry areas.

• Salt level: If you have a saltwater pool, check the manufacturer's limits before use.

Pool shape, obstacles and cleaning conditions can affect cleaning results. Check the maximum coverage rating on the relevant Australian product page rather than relying on figures from another regional website.

To compare the available models, visit the Beatbot Australia robotic pool cleaner range.

Which Beatbot Sora Model Should You Buy?

The choice comes down to what your pool needs most.

• Choose the Sora 70 if floating leaves and insects are a regular problem. It is the only model in the range that cleans the water surface as well as underwater areas.

• Choose the Sora 30 if you need underwater cleaning and have shallow ledges that the Sora 10 may not reach.

• Choose the Sora 10 if you mainly need routine underwater cleaning and want a lighter robot with a shorter charging time.

Before you decide, check your pool's size, the depth of any shallow areas and the type of debris you usually find. These details will help you choose a cleaner that suits your pool without paying for features you do not need.

FAQs 

Which Beatbot Sora model cleans floating leaves?

The Sora 70 is the only model that actively cleans floating leaves, pollen and insects from the water surface. The Sora 30 and Sora 10 only clean underwater areas.

Can the Sora 30 and Sora 70 clean shallow pool ledges?

Yes. Both models are designed to clean suitable platforms in water as shallow as about 20 cm. The Sora 10 requires about 30 cm of water. Check the platform's size and the manufacturer's requirements before buying.

Are Beatbot Sora cleaners suitable for saltwater pools?

Yes, provided the pool's salt concentration stays within the manufacturer's specified limit. Check the manual for your model before use.

Do I still need a pool pump if I use a robotic pool cleaner?

Yes. A robotic cleaner collects physical debris, but it does not replace the main pool pump, water circulation, chemical treatment or regular water testing.

Can I use a Sora cleaner without the Beatbot app?

Yes. All three models support offline control for basic operation. The app provides additional controls and monitoring features. The Sora 70 also supports remote control across the water surface.

Which Beatbot Sora model is easiest to lift out of the pool?

The Sora 10 is the lightest model, weighing about 8.5 kg. It parks at the waterline when the cycle ends. The Sora 30 and Sora 70 also have features that help bring the robot to the surface for collection.