Beatbot Sora 70(P7) vs AquaSense 2 Ultra: Which Pool Cleaner Suits Your Pool?

The Beatbot Sora 70(P7) and AquaSense 2 Ultra can both collect floating debris and clean the pool floor, walls and waterline. They're cordless, app-connected robotic pool cleaners, but they take different approaches to the job.

The Beatbot Sora 70(P7) focuses on thorough everyday cleaning, with JetPulse™ surface cleaning and access to particularly shallow platforms. The Beatbot AquaSense 2 Ultra adds AI pool mapping, targeted debris detection and ClearWater™ water clarification. Which one makes more sense depends on the shape of your pool and the cleaning jobs you want the robot to handle.

Beatbot Sora 70(P7) vs AquaSense 2 Ultra: Key Differences

Both models handle the main areas of a pool. The biggest differences are how they navigate, the depth of shallow areas they can reach, and whether you want water clarification as part of your cleaning routine.

One important point: the Sora 70 has the higher rated water flow, but that figure alone doesn't prove it will clean every pool better. Navigation, brush design and the kind of debris in your pool also affect the result.

Water-Surface Cleaning: Two Different Systems

If leaves and insects regularly land on your pool, both robots can remove them before they sink. You don't have to choose the AquaSense 2 Ultra just to get water-surface cleaning, and you don't have to choose the Sora 70(P7) to get it either.

Sora 70(P7): JetPulse™ Water Jets

The Sora 70(P7) uses two water jets to direct floating debris towards its intake. This helps it collect leaves, insects and other material on top of the water rather than simply pushing them aside as it moves.

JetPulse is a central part of the Sora 70(P7)'s design. If surface debris is one of your most frequent cleaning problems, its approach is straightforward: collect what is floating, then clean the areas below.

AquaSense 2 Ultra: Dual Side Brushes

The AquaSense 2 Ultra takes a different approach, using side brushes to guide floating debris into the cleaner. The brushes are particularly useful along edges and in corners where loose debris can gather.

Both models support app-controlled movement while they're on the water surface. The Ultra's advantage isn't that it alone can skim the pool; it's that surface cleaning sits alongside a more advanced mapping and cleaning system. Neither product page provides a directly comparable head-to-head test proving one collects floating leaves faster in every pool.

Shallow Steps and Complex Pool Layouts

A pool with one broad shallow shelf presents a different challenge from a pool with curved walls, multiple levels and steps at different depths. This is where the choice becomes more specific.

Sora 70(P7) for Shallower Platforms

The Sora 70(P7) can clean suitable platforms where the water is deeper than 20 cm, provided the area is at least 1 m long and 1 m wide. That makes it worth considering if you have a wide, shallow sun shelf that collects sand or leaves.

Its SonicSense™ system uses ultrasonic sensors to help it recognise obstacles and changes in the pool. On the floor, it follows an organised S-shaped path. It can also climb walls, brush the waterline and move between the main cleaning areas without a cable.

AquaSense 2 Ultra for Multi-Level and Irregular Pools

The AquaSense 2 Ultra has a different strength. Its HybridSense® system combines an AI camera with infrared and ultrasonic sensors to map the pool and plan a cleaning route. CleverNav™ then helps it follow that route around bends, slopes and other features.

It can identify platform areas and adapt its path across different levels. This is useful in pools with several ledges, curved steps or an irregular shape, where simply following a standard route may be less effective.

There is one detail to check before choosing it for shallow steps: the Australian AquaSense 2 Ultra page gives different minimum-depth figures in its feature description and FAQ. If the platform in your pool is close to the shallow end of its operating range, confirm the required depth rather than assuming it can reach the same 20 cm areas as the Sora 70(P7).

Underwater Cleaning and AI Debris Detection

Both models use roller brushes and suction to collect dirt from the pool floor. They also clean walls and the waterline, so the AquaSense 2 Ultra isn't an upgrade from floor-only cleaning. The practical difference is how much information each robot uses to decide where to go next.

The Sora 70(P7) has 6,800 GPH of rated water flow and a planned floor route. For a pool with a fairly regular layout, that covers the main job: loosen dirt, collect debris and clean across the usual surfaces.

The AquaSense 2 Ultra has 5,500 GPH of rated water flow, but adds an AI camera and a 27-sensor navigation system. Its AI Cruise Debris Detection can identify supported debris, including certain leaves, and direct extra cleaning attention to those areas. Instead of relying only on a preset path, it can respond to what its vision system detects.

That can matter when leaves collect in particular corners or around steps. It doesn't mean the robot recognises every kind of dirt, and a higher sensor count on its own isn't a guarantee of a better result. The benefit is the extra awareness and route planning available for more demanding pool shapes.

Filtration and Water Clarification

Both robotic pool cleaners collect leaves, dirt and other debris, but their filtration systems offer different benefits. The Sora 70(P7) has a larger debris basket for everyday cleaning, while the AquaSense 2 Ultra adds water clarification to help remove fine particles that can make pool water look cloudy.

How the Sora 70(P7) Handles Debris

The Sora 70(P7) has a 6 L debris basket and an included 150 µm filter. The large basket is useful when you're collecting bulky debris such as leaves, because you have more room before it needs emptying. A finer 3 µm filter is listed as an optional accessory, subject to availability in Australia.

What ClearWater™ Adds to the AquaSense 2 Ultra

The AquaSense 2 Ultra uses two filter baskets with different capacities and a layered filtration arrangement. It also offers ClearWater™ water clarification, which the Sora 70(P7) doesn't have.

ClearWater uses a clarifying agent derived from recycled crab shells. It helps small suspended particles clump together, making them easier to capture through filtration. This goes beyond collecting the leaves and sand you can see on the pool floor.

The clarifying agent is sold separately. ClearWater also doesn't replace your pool's circulation, filtration or water testing and sanitising routine. It's an extra way to support water clarity, not a substitute for maintaining the pool's water chemistry.

If your main problem is ordinary leaves and settled dirt, you may not need this feature. If you also want support with fine particles that make the water look cloudy, the AquaSense 2 Ultra offers an additional option.

Battery Life, Charging and Daily Handling

Battery life is only one part of the picture. How you charge, retrieve and carry your pool cleaner also matters, especially if you use it regularly. Here's how the Sora 70(P7) and AquaSense 2 Ultra compare in everyday use.

Cleaning Time

Both robots are rated for up to five hours of floor cleaning. For surface cleaning, the Sora 70(P7) is rated for up to seven hours, while the AquaSense 2 Ultra is rated for up to ten. These are separate cleaning-mode figures, not times to add together into one continuous session.

The Ultra has the larger battery at 13,400 mAh, compared with 10,000 mAh in the Sora 70. Both take approximately 4.5 hours to charge. Actual runtime depends on the mode, the pool and the cleaning conditions.

Retrieval and Charging

Both cleaners make retrieval easier by returning to the water surface rather than staying at the bottom of the pool. Both support app-assisted return while the robot is on the surface, and both use SmartDrain™ to release water when you're taking them out.

The Sora 70(P7) weighs approximately 10.4 kg, making it lighter to carry than the AquaSense 2 Ultra at approximately 13.2 kg. That difference may be noticeable if you move the robot between a storage area and the pool after every clean.

Charging is different too. The Sora 70(P7) uses a charging plug, while the AquaSense 2 Ultra uses a wireless charging dock. The Ultra also lets you review its pool map and floor-cleaning path in the app. If you want to see how the robot navigated, that's a useful extra detail.

Which Beatbot Should You Choose?

The Sora 70(P7) already handles the main cleaning tasks, so you may not need the AquaSense 2 Ultra's additional features. However, if your pool has a complex layout or you want more advanced navigation and water clarification, the Ultra offers some clear advantages.

Choose Sora 70(P7) for Everyday Cleaning and Very Shallow Platforms

If your pool has a relatively straightforward layout, the Sora 70(P7) covers the work that matters most: floating leaves, debris on the floor, walls, the waterline and suitable shallow platforms. JetPulse™ handles the surface, while the 6 L basket gives you room for larger debris loads.

It's also the lighter machine. For pool owners who regularly clean a shallow shelf or want broad cleaning coverage without needing AI mapping or water clarification, there's a clear reason to choose it.

Choose AquaSense 2 Ultra for Advanced Mapping and Water Clarification

If your pool has several levels, tight corners, unusual curves or complex steps, the AquaSense 2 Ultra offers more advanced navigation tools. Its AI mapping and debris detection help it adapt to the layout and focus on recognised debris, while its side brushes also collect material at the surface.

ClearWater™ adds a separate benefit if you want help with fine suspended particles as well as routine cleaning. The extra surface-cleaning runtime, wireless charging dock and mapped cleaning history may also be useful, depending on how you maintain your pool.

The simplest way to decide: Sora 70(P7) covers everyday whole-pool cleaning and reaches shallower platforms. AquaSense 2 Ultra also cleans the surface and underwater, but adds AI mapping, targeted debris detection and water clarification for more complex cleaning needs.

FAQs

Can both the Sora 70(P7) and AquaSense 2 Ultra clean floating leaves?

Yes. Sora 70(P7) uses JetPulse™ water jets, while AquaSense 2 Ultra uses dual side brushes to guide floating debris towards the intake. Both can clean the water surface as well as the main underwater areas.

Which model is better for a shallow sun shelf?

Sora 70(P7) has the clearer specification for very shallow shelves. It can clean suitable platforms in water deeper than 20 cm, provided they measure at least 1 m × 1 m. AquaSense 2 Ultra also cleans platforms, but its Australian product information gives deeper and inconsistent minimum-depth guidance, so confirm compatibility before buying.

Does AquaSense 2 Ultra clean pool floors better than Sora 70(P7)?

It has more advanced mapping and can target certain detected debris, which may help in complex pools. Sora 70(P7) has the higher rated water flow. Neither specification alone proves one model cleans every pool floor better; the layout and type of debris matter.

Does Sora 70(P7) have AI pool mapping?

No HybridSense® camera-based pool mapping is listed for Sora 70(P7). It uses SonicSense™ ultrasonic obstacle avoidance and planned paths. AquaSense 2 Ultra adds an AI camera, pool mapping and the ability to review its mapped cleaning route in the app.

Do I need water clarification if I already use a pool filter?

Not necessarily. Your pool's main filtration and sanitising systems still do the essential work. AquaSense 2 Ultra's optional ClearWater™ clarifying agent can help fine suspended particles become easier to filter, but isn't required for routine collection of leaves and settled debris.

Which Beatbot is easier to take out of the pool?

Both support surface return and water draining for easier lifting. Sora 70(P7) is lighter at approximately 10.4 kg, compared with around 13.2 kg for AquaSense 2 Ultra, so it may be more comfortable to carry once removed.